“Take good care of your PC, and it will take good care of you.”

It’s a nice sentiment, but reality is more like “Take good care of your PC, and it won’t crash, lose your data, and cost you your job–probably.” Follow these steps to stop PC problems before they stop you.

Your PC’s two mortal enemies are heat and moisture. Excess heat accelerates the deterioration of the delicate circuits in your system. The most common causes of overheating are dust and dirt: Clogged vents and CPU cooling fans can keep heat-dissipating air from moving through the case, and even a thin coating of dust or dirt can raise the temperature of your machine’s components.

Any grime, but especially the residue of cigarette smoke, can corrode exposed metal contacts. That’s why it pays to keep your system clean, inside and out.

If your PC resides in a relatively clean, climate-controlled environment, an annual cleaning should be sufficient. But in most real-world locations, such as dusty offices or shop floors, your system may need a cleaning every few months.

All you need are lint-free wipes, a can of compressed air, a few drops of a mild cleaning solution such as Formula 409 or Simple Green in a bowl of water, and an antistatic wrist strap to protect your system when you clean inside the case. (more…)

Popularity: unranked [?]

BandWidth Explained

Most hosting companies offer a variety of bandwidth options in their plans. So exactly what is bandwidth as it relates to web hosting? Put simply, bandwidth is the amount of traffic that is allowed to occur between your web site and the rest of the internet. The amount of bandwidth a hosting company can provide is determined by their network connections, both internal to their data center and external to the public internet.

Network Connectivity

The internet, in the most simplest of terms, is a group of millions of computers connected by networks. These connections within the internet can be large or small depending upon the cabling and equipment that is used at a particular internet location. It is the size of each network connection that determines how much bandwidth is available. For example, if you use a DSL connection to connect to the internet, you have 1.54 Mega bits (Mb) of bandwidth. Bandwidth therefore is measured in bits (a single 0 or 1). Bits are grouped in bytes which form words, text, and other information that is transferred between your computer and the internet.

If you have a DSL connection to the internet, you have dedicated bandwidth between your computer and your internet provider. But your internet provider may have thousands of DSL connections to their location. All of these connection aggregate at your internet provider who then has their own dedicated connection to the internet (or multiple connections) which is much larger than your single connection. They must have enough bandwidth to serve your computing needs as well as all of their other customers. So while you have a 1.54Mb connection to your internet provider, your internet provider may have a 255Mb connection to the internet so it can accommodate your needs and up to 166 other users (255/1.54). (more…)

Popularity: unranked [?]

There’s DVD+R, DVD+RW, DVD-R, DVD-RW, and even DVD-ROM! So what’s the difference between all of these different names, aren’t all DVDs the same? Well, it’s not quite that simple.

Let’s first start with the most obvious difference: some have R and some have RW. The “R” stands for readable, while the “W” stands for writeable.

The main difference between DVD-R and DVD-RW, or DVD+R and DVD+RW is that the R disc formats can only be written to once, and then it is only readable and can’t be erased for the rest of its digital life. While RW discs are can be written to and erased many times, they are both readable and writeable.

“R” discs are perfect if they are only needed to be written to once, such as giving some files to a friend or transferring them between PCs. “RW” discs have their strength in the ability to be used many times over, which is great for routine system backups, etc. And naturally, the RW discs are slightly more expensive than the R discs, but you’ll have to decide if the trade offs are worth the money. (more…)

Popularity: unranked [?]

STOP NOISE IN COPYING AUDIO CD
When using 3rd party burning software (eg, Nero Burning Rom) to copy audio CD,some noise may be heard at the end of each track. To prevent this,try the following method:

1. Enter System Properties\device manager
2. Select IDE ATA/ATAPI controllers
3. Double click on thee CD writer IDE channel
4. Select advance setting
5. Change the transfer mode to ‘PIO Only’
6. Restart Computer

DISABLING THE ‘UNSIGNED DRIVER’ DIALOGS
This option wll disable the screen wich keeps popping up when you try to install ‘digitally unsigned drivers’. Normally you can choose to continue the install anyways, but I have had situations where you cannot continue the install.. very annoying.. This is how to fix it:
Click Start – Run then type: gpedit.msc then hit enter.
Browse the folder tree to the following location:
User Configuration – Administrative Templates – System now right-click Code signing for Device drivers and select Properties. On the Settings tab, either select
- enable, and then select ignore from the appearing listbox..
- or click the disable option. Click apply and Ok and your set!
Alternatively especially for XP Home users:
Open “System” properties (Windows key + pause or Right click ‘My Computer’ – properties or Control Panel – System).On the Hardware tab click the “Driver Signing” button. In the dialogue that comes up choose “Ignore” to install the new driver anyway. (more…)

Popularity: unranked [?]

1. First, run a scandisk or checkdisk. Let Windows fix any errors.

2. Run a disk cleanup utility…this will flush your temporary internet folder, trash can, temp system files, etc.

3. Delete any garbage files or data…if possible, run a Duplicate File Finder program.

4. Run Defrag on all partitions (NOTE: run this after you have deleted all trash and excess files!)

5. Run a registry cleaner utility and delete or get rid of any orphaned entries in that registry.

6. Check your exisiting swap file for it’s size and location (*will explain location later in the post). If you have alot of ram (i.e. 1 gig and over) set this swap file to something small, like 250 mb. The reason is that this will force Windows to load more into memory, resulting in faster performance (note: some games and applications actually require a certain sized swap file so check your applications performance after making a size adjustment for any error messages.) (more…)

Popularity: unranked [?]

This is only a quick tutorial, there are literally hundreds of little tricks you can do with a DNS, but this will get your basics up and running. I’m assuming you want to setup a windows DNS server, but the principals will work for most servers.

You will need..

1. A domain name over which you have full control
2. DNS server software(Windows server always comes with one of these)
3. At least one fixed IP address, allthough two is highly desirable
4. An idea of what services you want on your server

The first thing you need to do is create your new domain entry. In windows this is called a “Zone” and you will have one for every domain name you have. Add your main domain in the forward lookup zone as a Primary zone, which will be in the format “Domainname.com”, or .co.uk, or whatever, you shouldn’t need any more details for this bit. Do *not* allow dynamic updates unless this is a local network DNS. Once it is created you will have 2 entry’s under your new domain, “SOA”(Or Start of Authority) and “NS”(Or Name server). If you want a 100% compliant DNS then you should now follow the same process but adding a domain as a reverse lookup zone. Any changes you make to the forward lookup should have the “Update Reverse Lookup” option ticked if its available, if not you must update the reverse zone manually(This is very important). (more…)

Popularity: unranked [?]

The tutorial is all about getting your site listed on top in Search Engines i.e Search Engine Optimization

First thing you need to do is find the keywords you want to optimize for.

There is great tool by Overture (http://inventory.overture.com/d/sea…ory/suggestion/)

But I would suggest using this free tool called GoodKeywords (http://www.goodkeywords.com/products/gkw/)

This one does the same job as Overture does but it also supports other Search Engines (Lycos and Teoma etc..)

For example if you want to optimize for the keyword “tech news”, just search for the keyword in any of the tools specified above… It would show you keywords related to that and not of the searches..

Pick the keywords which are related to your site.

For example when you search for “Tech News” you’ll see the following results: (more…)

Popularity: unranked [?]